Specs Cars

1. Park the Audi A4 on level ground.
2. Press onto the left side of the switch to raise or lower the front portion of the seat.
3. Press onto the right side of the switch to raise or lower the rear portion of the seat.
4. Press on both the left and right sides of the switch to raise or lower the entire seat bottom.
5. Press at the center of the switch to move the seat forward or backward.

On the eve of the 2011 Geneva motor show, Seat has unveiled this IBX crossover concept at the Volkswagen Group’s pre-show party. Designed under the watch of ex-Lamborghini designer Luc Donckerwolke, it’s the second concept car to preview Seat’s future design language, and a strong hint that company is preparing to launch a new, small SUV.Seat IBX? Was it the Seat IBE that came before?Yes, and in

1. Open the door of the car all the way to allow access to the seat. Slide the seat all the way to the front position. Locate the mounting brackets and adjuster slides under the seat.
2. Locate the two rear retaining bolts that run through the mounting brackets and into the floor. Remove both bolts with a socket and ratchet, setting the bolts aside in a safe place.
3. Slide the seat all the way to the rear position on the seat track. Locate the retaining bolts on the front of the seat, where the brackets meet the floor. Remove the two front bolts from the floor and brackets with a socket and ratchet, setting them aside for reuse later.
4. Lift the front of the seat, tilting it back so you can access the underside. Locate the electrical connector on the underside of the seat and depress the locking tab to release it. Separate the wiring harness on the seat from the harness on the car.
5. Lift the seat and remove it from the car through the door opening. Set it aside in a dry spot to avoid any damage while it is out of the car.